Simpler Implants - Surgical

3000 Series Threaded Implants (With acid etched surface)

SM 3002: 2.5 x 10 mm Transitional

SM 3002: 2.5 x 13 mm Transitional

SM 3002: 2.5 x 15 mm Transitional

ST3002: 3.25 x 10 mm Simpler Threaded
ST3003: 3.25 x 13 mm Simpler Threaded
ST3004: 3.25 x 15 mm Simpler Threaded

ST3005: 4.0 x 8 mm Simpler Threaded
ST3006: 4.0 x 10 mm Simpler Threaded
ST3007: 4.0 x 13 mm Simpler Threaded
ST3008: 4.0 x 15 mm Simpler Threaded

ST3010: 5.0 x 6 mm Simpler Threaded
ST3011: 5.0 x 8 mm Simpler Threaded

ST3012: 5.0 x 10 mm Simpler Threaded

ST3013: 5.0 x 13 mm Simpler Threaded

ST3010: 5.0 x 15 mm Simpler Threaded

ST3020: 6.0 x 6 mm Simpler Threaded

ST3010: 6.0 x 8 mm Simpler Threaded

ST3022: 6.0 x 10 mm Simpler Threaded

ST3023: 6.0 x 13 mm Simpler Threaded

ST3024: 6.0 x 15 mm Simpler Threaded

SIT3002: 3.25 mm x 10 mm Simpler One Threaded
SIT3003: 3.25 mm x 13 mm Simpler One Threaded
SIT3004: 3.25 mm x 15 mm Simpler One Threaded

SIT3005: 4.0 mm x 8 mm Simpler One Threaded
SIT3006: 4.0 mm x 10 mm Simpler One Threaded
SIT3007: 4.0 mm x 13 mm Simpler One Threaded
SIT3008: 4.0 mm x 15 mm Simpler One Threaded

top

5000 Series HA Coated Push InImplants

S5002: 3.25 mm x 10 mm Simpler HA Coated Implant
S5003: 3.25 mm x 13 mm Simpler HA Coated Implant
S5004: 3.25 mm x 15 mm Simpler HA Coated Implant

S5005: 4.0 mm x 8 mm Simpler HA Coated Implant
S5006: 4.0 mm x 10 mm Simpler HA Coated Implant
S5007: 4.0 mm x 13 mm Simpler HA Coated Implant
S5008: 4.0 mm x 15 mm Simpler HA Coated Implant

A5002: 3.0 mm x 10 mm Anchor HA Coated Implant
A5003: 3.0 mm x 13 mm Anchor HA Coated Implant
A5004: 3.0 mm x 15 mm Anchor HA Coated Implant

A5005: 4.0 mm x 8 mm Anchor HA Coated Implant
A5006: 4.0 mm x 10 mm Anchor HA Coated Implant
A5007: 4.0 mm x 13 mm Anchor HA Coated Implant
A5008: 4.0 mm x 15 mm Anchor HA Coated Implant

5000 Series Simpler One HA Coated Push In Implants

SI5002 3.25 mm x 10 mm Simpler One HA Coated Implant
SI5003 3.25 mm x 13 mm Simpler One HA Coated Implant
SI5004 3.25 mm x 15 mm Simpler One HA Coated Implant

SI5005 4.0 mm x 8 mm Simpler One HA Coated Implant
SI5006 4.0 mm x 10 mm Simpler One HA Coated Implant
SI5007 4.0 mm x 13 mm Simpler One HA Coated Implant
SI5008 4.0 mm x 15 mm Simpler One HA Coated Implant

5000 Series Simpler HA Coated Threaded Implants

ST5002: 3.25 mm x 10 mm Simpler HA Threaded Implant
ST5003: 3.25 mm x 13 mm Simpler HA Threaded Implant
ST5004: 3.25 mm x 15 mm Simpler HA Threaded Implant

ST5005: 4.0 mm x 8 mm Simpler HA Threaded Implant
ST5006: 4.0 mm x 10 mm Simpler HA Threaded Implant
ST5007: 4.0 mm x 13 mm Simpler HA Threaded Implant
ST5008: 4.0 mm x 15 mm Simpler HA Threaded Implant

5000 Series Simpler One HA Coated Threaded Implants

SIT5002 3.25 mm x 10 mm Simpler One HA Threaded Implant
SIT5003 3.25 mm x 13 mm Simpler One HA Threaded Implant
SIT5004 3.25 mm x 15 mm Simpler One HA Threaded Implant

SIT5005 4.0 mm x 8 mm Simpler One HA Threaded Implant
SIT5006 4.0 mm x 10 mm Simpler One HA Threaded Implant
SIT5007 4.0 mm x 13 mm Simpler One HA Threaded Implant
SIT5008 4.0 mm x 15 mm Simpler One HA Threaded Implant

top

6000 Series Drills

1.5mm Pilot Drill: Carbide tipped, stainless steel drill 1.5mm in diameter fits high speed handpiece. Used to make initial pilot hole through cortical layer of bone.

AS6001

1.5mm Pilot Drill

Spade Drill: An internally irrigated, titanium coated, stainless steel, end cutting drill. Has depth markings at 8, 10, 13 and 15mm to indicate corresponding depths in bone. Used to enlarge pilot hole to accept equivalent diameter implant.

S6002:
A6003:
S6003:
AS6004:

2.0 mm Simpler Spade Drill
3.0 mm Spade Drill
3.25 mm Simpler Spade Drill
4.0 mm Spade Drill

Drill Extender: Stainless steel, fits contra angle shank while other end accepts shank of drills. Used to extend length of drill when handpiece head will not fit between closely approximating teeth.

AS6005:

Drill Extender

Tissue Punch: Hardened stainless steel circular cutting blade on a contra angle shank used to cut a circular hole through soft tissue thread to limit flap exposure during “Cookie Cutter” technique and during second stage uncovering of the implant.

AS6007:

4.0 mm Tissue Punch

Contra angle Driver ffor Threaded Implants: Hardened stainless steel driver on a contra angle shank used to drive Simpler implants into bone.

ST6010: C/A Driver for 3.25 mm SImpler Threaded Implant

ST6011: C/A Driver for 4.0 mm SImpler Threaded Implant

ST6012: C/A Driver for External Hex Transitional Implant

top

7000 Series Instruments

Alan Key: 1.3mm hex fits all Simpler cover screws, healing collars and retaining screws

AS7001S:	1.3 mm Alan Key, Short
AS7001L:	1.3 mm Alan Key, Long

Hex Wrench: Stainless steel wrench used to tighten O Ring Connectors and Impression Posts with a Hex Top.

AS7003:

Hex Wrench

Hand Tissue Punch: Hardened stainless steel circular cutting blade, used to cut 4.0mm diameter hole through soft tissue thread to limit flap exposure during Cookie Cutter technique and during second stage uncovering of the implant.

AS7004:

4.0 mm Hand Tissue Punch

Paralleling Pin: Stainless steel, double ended; one end 1.4mm in diameter to fit into hole made by pilot drill, the other end 2.9mm to fit into hole made by the 3.0mm spade drill. Used as a guide to indicate direction made by the drills.

AS7005:

Paralleling Pin

Depth Gauge: Used to confirm depth of the drill hole.

AS7006:	3.0 mm Depth Gauge
AS7007:	4.0 mm Depth Gauge

Implant Retriever: Stainless steel, used to thread into the top of the Simpler implant to remove implant from bone without touching surface of the implant.

AS7008:	3.25 mm Simpler Implant Retriever
AS7009:	4.0 mm Simpler Implant Retriever

Implant Seating Tool: Stainless steel, designed to fit both the top of the implants and the cover screws. Used to seat the implant during surgical placement procedure.

S7010:

Implant Seating Tool

Hand Mallet: Used to seat implant during surgical placement procedure.

AS7012:

Hand Mallet

Ratchet: Stainless steel ratchet, designed to run clockwise or counter-clockwise, accepts all 4 mm hexagonal drivers.

AS7014:

Ratchet

Threaded Implant Driver for Ratchet: Stainless steel ratchet driver fits 4mm sized ratchet. Has a external hex driver end used to tighten threaded implants.

ST7030:	Hex Driver for 3.25 mm threaded implant
ST7031:	Hex Driver for 4.0 mm threaded implant

Hex Driver for Ratchet: Stainless steel ratchet driver fits 4mm sized ratchet. Has a hex wrench driver end used to tighten O Ring Connectors.

AS7032:

Hex Driver for Ratchet

Threaded Hand Tap: The hand tap fits the ratchet as well as the hand wheel allowing the operator to tap the bone by hand or with the ratchet.

ST7023: ST7024:

3.25 mm Hand Tap
4.0 mm Hand Tap

Hand Tap Wheel: Made from stainless steel; attaches to the threaded hand taps for greater torque.

S7025: Hand Tap Wheel

Drivers for Ratchet: Stainless steel ratchet driver fits 1/4" square ratchet. Has either an internal hex driver to insert SImpler threaded implants into bone, an external hex driver end used to tighten transitional implants into bone or an Aln key end to tighten screws.

S7030: Driver for 3.25 mm Simpler threaded implant

S7031: Driver for 4.0 mm Simpler threaded implant

AS7032:: External Driver for Hex

AS7033: Driver for Alan Key

top

		Free Assessment

		Financial Assistance

View our Product Advantages

Sharpening Your Spade Drills