|
 |
8000 Series Healing Collars
Healing collars are screwed into the implant during the uncovering second stage to allow the soft tissue to heal. Can also be used at initial surgery by unscrewing the cover screw in the implant & screwing in a healing collar, turning the implant into a One Stage. They are made from 6/4 Titanium alloy and are 1.0 mm oversize in diameter to the implant to make impression taking easier and more accurate and to allow crowns to be seated without impinging and dislocating soft tissue. They are available diameters of 3.25 mm and 4.0 mm and heights of 3.0 mm, 5.0 mm and 7.0 mm.
S8001:
S8002:
S8003:
S8004:
S8005:
S8006:
S8011:
S8012:
S8021
S8022:
A8001:
A8002:
A8003:
A8004:
A8005:
A8006: |
3.25mm x 3.0 mm Simpler Healing Collar
3.25mm x 5.0 mm Simpler Healing Collar
3.25mm x 7.0 mm Simpler Healing Collar
4.0 mm x 3.0 mm Simpler Healing Collar
4.0 mm x 5.0 mm Simpler Healing Collar
4.0 mm x 7.0 mm Simpler Healing Collar
5.0 mm x 3.0 mm Simpler Healing Collar
5.0 mm x 5.0 mm Simpler Healing Collar
6.0 mm x 3.0 mm Simpler Healing Collar
6.0 mm x 5.0 mm Simpler Healing Collar
3.0 x 3.0 mm Anchor Healing Collar
3.0 x 5.0 mm Anchor Healing Collar
3.0 x 7.0 mm Anchor Healing Collar
4.0 mm x 3.0 mm Anchor Healing Collar
4.0 mm x 5.0 mm Anchor Healing Collar
4.0 mm x 7.0 mm Anchor Healing Collar
|
|
 |
9000 Series Impression Pins
Stainless steel; used during impression-taking of implant. Impression Pins/Posts have vertical and horizontal orientation grooves for accurate transfer.
S9001:
S9002:
A9001:
A9002:
AS9004:
S9005:
S9006: |
3.25 mm Simpler Impression Pin
4.0 mm Simpler Impression Pin
(* Use S9002 for 4.0, 5.0, & 6.0 mm implants)
3.0 mm Anchor Impression Pin
4.0 mm Anchor Impression Pin
Bar Post Impression Coping
3.25 mm Simpler Open Top Impression Pin
4.0 mm Simpler Open Top Impression Pin
|
|
 |
10000 Series Analogues
All analogues are made from stainless steel and are used during the laboratory procedure as a die in working model. They are threaded internally to accept abutments, and impression pins, as well as plastic laboratory components.
Implant Analogues: Used to replicate the internal taper & threads of the implant
S10001:
S10002:
ST10005:
ST10006:
A10001:
A10002:
|
3.25 mm Simpler Implant Analogue
4.0 mm Simpler Implant Analogue
5.0 mm Simpler Implant Analogue
6.0 mm Simpler Implant Analogue
3.0 mm Anchor Implant Analogue
4.0 mm Anchor Implant Analogue
|
 |
Bar Post Analogue: Used to replicate the top of the Bar Post Abutment.
| AS10004: |
Bar Post Analogue |
 |
O Ring Analogue: Replicates top of “O” ring connector. Used during lab procedure if
keeper is processed into denture base at same time denture is being processed.
| AS10005: |
O Ring Analogue |
|
11000 Series O Ring Abutments
The base of the O ring abutments are designed to thread into the top of the implant. The top of the abutment attaches to a rubber O ring imbedded into a denture base.
S11013:
S11001:
S11002:
S11003:
S11004:
S11014:
S11005:
S11006:
S11007:
S11008:
A11005:
A11006:
A11007:
A11008:
AS11009:
AS11010:
AS11011:
AS11012:
|
3.25 x 0 mm Simpler O Ring Abutment
3.25 x 1.0 mm Simpler O Ring Abutment
3.25 x 2.0 mm Simpler O Ring Abutment
3.25 x 3.0 mm Simpler O Ring Abutment
3.25 x 4.0 mm Simpler O Ring Abutment
4.0 x 0 mm Simpler O Ring Abutment
4.0 x 1.0 mm Simpler O Ring Abutment
4.0 x 2.0 mm Simpler O Ring Abutment
4.0 x 3.0 mm Simpler O Ring Abutment
4.0 x 4.0 mm Simpler O Ring Abutment
4.0 x 1.0 mm Anchor O Ring Abutment
4.0 x 2.0 mm Anchor O Ring Abutment
4.0 x 3.0 mm Anchor O Ring Abutment
4.0 x 4.0 mm Anchor O Ring Abutment
“O” Ring Keepers (Pkg. of 4)
“O” Rubber Rings, Small Black (Pkg. of 12)
“O” Rubber Rings, Large (Pkg. of 4)
“O” Rubber Rings, Small White (Pkg. of 12) |
|
14000 Series Bar Post Abutments
Used with implant supported overdenture, fixed detachable cast metal frameworks, the “Passive Fit” system and retrievable fixed bridgework. Both diameters are available with various height transmucosal collars.
S14013:
S14001:
S14002:
S14003:
S14004:
S14014:
S14005:
S14006:
S14007:
S14008:
A14001:
A14002:
A14003:
A14004:
A14005:
A14006:
A14007:
A14008:
AS14009
AS14010Y
AS14010R |
3.25 mm x 1.0 mm Simpler Bar Post Abutment
3.25 mm x 2.0 mm Simpler Bar Post Abutment
3.25 mm x 3.0 mm Simpler Bar Post Abutment
3.25 mm x 4.0 mm Simpler Bar Post Abutment
3.25 mm x 5.0 mm Simpler Bar Post Abutment
4.0 mm x 1.0 mm Simpler Bar Post Abutment
4.0 mm x 2.0 mm Simpler Bar Post Abutment
4.0 mm x 3.0 mm Simpler Bar Post Abutment
4.0 mm x 4.0 mm Simpler Bar Post Abutment
4.0 mm x 5.0 mm Simpler Bar Post Abutment
3.0 mm x 2.0 mm Anchor Bar Post Abutment
3.0 mm x 3.0 mm Anchor Bar Post Abutment
3.0 mm x 4.0 mm Anchor Bar Post Abutment
3.0 mm x 5.0 mm Anchor Bar Post Abutment
4.0 mm x 2.0 mm Anchor Bar Post Abutment
4.0 mm x 3.0 mm Anchor Bar Post Abutment
4.0 mm x 4.0 mm Anchor Bar Post Abutment
4.0 mm x 5.0 mm Anchor Bar Post Abutment
Bar Post Abutment Screw
Yellow Hader Clips (Average strength)
Red Hader Clips (Greater strength) |
|
 |
15000 Series Swedish Bar Post Abutment
Designed to fit into the top of the Swedish Type implants.
B15006:
B15007: B15008:
|
Swedish Type Bar Post Abutment, 3 mm Collar
Swedish Type Bar Post Abutment, 4 mm Collar
Swedish Type Bar Post Abutment, 5 mm Collar |
 |
16000 Series Passive Fit System
Inherent inaccuracies in the impression taking, pouring of models, waxing, investing and casting procedures can result in an inaccurate fitting framework on the abutments resulting in stress and deformation to the bone. The “Passive Fit System” accepts the reality of the numerous individual and cumulative potentials for error and compensates for the inaccurate casting. Openings in the casting are purposely made oversize by 0.5 mm. The oversized casting is bonded to the machined Titanium Bar Post Housing which in turn fits snugly on the abutment. The result is a strong, passively fitting framework to the implant abutments, regardless of the number of abutments or the distances involved.
2.0 mm Short Retaining Screw: Made from 6/4 Titanium alloy and designed to retain Titanium Screw Housing to the Bar Post Abutment.
AS21001: 2.0 mm Short Retaining Screw
Bar Post Burnout Coping: Used during the waxup of the “Passive Fit” framework as part of the framework. Fits around the spacer.
AS16003: Bar Post Burnout Coping
Bar Post Spacer: Used during the waxup of the “Passive Fit” framework. Removed prior to casting to provide space for composite during intraoral light curing procedure.
AS16002: Bar Post Spacer
Titanium Bar Post Screw Housing: Made from 6/4 Titanium to fit precisely to the Bar Post Abutment and analogue. When bonded to the “Passive Fit “ metal framework, it provides a precision fit of the framework to the Bar Post Abutments.
AS16001: Titanium Bar Post Screw Housing
17000 Series Retrievable Crown Post Abutments
Simpler Retrievable Crown Posts are designed to fit the Simpler and Simpler One implants, be retrievable and anti-rotational. They are held into the implant with a Crown Post Retaining Screw. They can be placed in any position around the 360 degrees of a circle. Available straight, 15 degrees and 25 degrees & with 0.0, 1.0 mm & 3.0 mm collars.
S17001:
SI17001:
S17002:
S17003:
SI17003:
S17004:
S17005:
S17006:
S17007:
S17008:
S17009:
S17011: |
3.25 mm x 1.0 mm Collar; Straight
3.25 mm x 0.0 mm Collar; Straight
3.25mm x 3mm Collar; Straight
4.0 mm x 1.0 mm Collar; Straight
4.0 mm x 0.0 mm Collar; Straight
4.0 mm x 3.0 mm Collar; Straight
3.25 mm x 1.0 mm Collar; 15 Degree
3.25 mm x 3.0 mm Collar; 15 Degree
4.0 mm x 1.0 mm Collar; 15 Degree
4.0 mm x 3.0 mm Collar; 15 Degree
3.25 mm x 1.0 mm Collar; 25 Degree
4.0 mm x 1.0 mm Collar; 25 Degree |
|
 |
Simpler Crown Post Screw: Used to retain Simpler Retrievable Crown Posts & Simpler Open Top Impression Post to the implant
S17013:
S17014:
|
3.25 mm Simpler Crown Post Screw
4.0 mm Simpler Crown Post Screw |
|  |
18000 Series Simpler Cementable Crown Posts
Simpler Cementable Crown Posts are anti-rotational but not retrievable. Although the Simpler Cementable Crown Posts are designed to fit into the Simpler One and Simpler One Threaded implants, they can be used with the Simpler and the Simpler Threaded implants.. They are cemented into the implant using a dual-cure composite cement. Can be placed in any position around the 360 degrees of a circle. Available straight, 15 degrees and 25 degrees with 0.0 mm collars.
SI18001:
SI18003:
SI18005:
SI18007:
SI18009:
SI18011:
|
3.25 mm x Straight Cementable Crown Post
4.0 mm x Straight Cementable Crown Post
3.25 mm x 15 degree Cementable Crown Post
4.0 mm x 15 degree Cementable Crown Post
3.25 mm x 25 degree Cementable Crown Post
4.0 mm x 25 degree Cementable Crown Post |
 |
|
©2005 Simpler Implants | Privacy Policy | Site Map | Contact Us
Web site design and programming by Graphically Speaking
|
|
|
|
|
